Spindles For Milling Machines

Spindles For Milling Machines COUNTRY: Italy MARKET: Machine Tools PMC supplies big rotor-stator units used in the spindles for milling axis, up to 800Nm @8000rpm in a diameter of 240mm max. Control power range with a ratio up to 1:8. PMC products used on the machine: Torque frameless motors TK series TK.240.240.x (Tnom=450Nm

Dir. drive for machine toolsmain generator axis, pitch and yaw control axes

Dir. drive for machine toolsmain generator axis, pitch and yaw control axes COUNTRY: Italy MARKET: Power generation (Wind Power) PMC supplies big DD generators for wind generation system up to 1MW @25rpm. PMC develops big generator with double

Indexing Rotary Tables

Indexing Rotary Tables COUNTRY: France MARKET: Machine Tools (Transfer Machine) PMC supplies DD motors in rotary tables applications mainly for indexing and contouring axes in the automotive market. The DD rotor-stator units are used for the big diameter and little axial volume. This motors can guarantee high torque density value at

Horizontal Combined Lathes

Horizontal Combined Lathes COUNTRY: Germany MARKET: Machine Tools PMC supplies DD motors for main spindle, power 20÷50kW, torque in S1cycle 200÷2000Nm, max. speed up to 8000rpm. Range of application at constant power up to 1:10. Frame and rotor very customized to permit the encoder, brake, hydraulic pilot

Punching presses

Punching presses COUNTRY: Italy MARKET: Metal Forming At the moment unique in the world; a straordinary DD rotor-stator unit with lowest inertia, water cooled (300Nm in S1 @ 800rpm) drives directly a ball screw getting 350 strokes/min. with a cutting load of 10tons. To obtain this speed the axis movement is a little portion

Wiredrawing Machine

Wiredrawing Machine COUNTRY: Italy MARKET: Metal Forming PMC supplies DD motors for copper wire working. Packaged motors (from 250 up to 2500Nm) in DD on the draw-plate with nom. power up to 100kW for the first machine stadium. Complete DD motors. Motors that can work at high speed as well.

Giant Milling Gantry Machine

Giant Milling Gantry Machine COUNTRY: USA MARKET: Big Machine Tools (Areonautic) (dimensions working parts up to 40m) PMC supplies DD packaged (with pinion) motors with highest torsional stiffness (3000Nm in S1 cycle) The motors are in DD on the axes rack electronic mechanical gap elimination(single or double

Forging Presses – Screw press axis

Forging Presses – Screw press axis COUNTRY: Italy MARKET: Metal Forming Direct drive directly on the flywheel of the forging hammer. DD motors segmented with increased axial air-gap to obtain an impact proof solution (diam. 2,3,4m / 6,8 segm. up to 0,6MW max. power during the impact). Reduced production reject material.

Vertical Lathes overturned

Vertical Lathes overturned COUNTRY: Italy MARKET: Machine Tools (Automotive Market) Machines tools for high productions parts. The spindle is mounted directly on the load. PMC supplies rotor-stator units DD for spindles, axes and change tools head. The main spindle supplies 500Nm @8000rpm (ext. diam.240mm).

Tool changer

Tool changer COUNTRY: Germany MARKET: Machine Tools These machines have the first turret tool with integrated motor. This solution minimizes the development of heat and vibration with a optimized torque transmission are obtained, in this way, optimum machining accuracy and top cutting performance.

Rotary Tables

Rotary Tables COUNTRY: Germany MARKET: Machine Tools PMC supplies DD motors for rotary tables up to 1200mm, power 20÷35kW, torque in S1cycle 1750÷5500Nm, max. torque up to 9000rpm. Turning/Milling centers combine two processes on a single machine. Milling and turning in a single setup ensure maximum

Hydraulic Servo Molding Machine

Hydraulic Servo Molding Machine COUNTRY: Italy MARKET: Plastic IMM PMC supply ULTRACT III servo motors for shoes making machine. ULTRACTIII series motors have high power/size and high torque/size ratio, which guarantee a system with a very compactness, flexibility, modularity and high productivity. Helping customer to save power

Plastic bags Machine

Plastic bags Machine COUNTRY: Italy MARKET: Plastics PMC supplies standard motors with very low inertia to obtain and guarantee many intermittent and repeatable feeding with highest dynamics (very short cycle) up to 450/480 automatic feed per minute. For this application is required highest overload capacity.

Corrugated Cardboard Cutting

Corrugated Cardboard Cutting COUNTRY: Italy MARKET: Special Machine PMC supplies big motors (coupling flange 250mm2) fan cooled in direct drive with the blades of the cutting system. The cutting system is made up of 3/4m blades that need high peak torque values and highest dynamics (very short cycle).

Wood Working Machine

Wood Working Machine COUNTRY: Italy MARKET: Wood working Nr. 3 interpolated axes with Can-Open interface for the head manufacturing and axes positioning. The TW5 motors, in direct drive on the belts that drive the X,Y,Z axes movements, guarantee a system with a very compactness, flexibility, modularity

Plastics/Glass/Wood Machines

Plastics/Glass/Wood Machines COUNTRY: Italy MARKET: Special Machine Nr. 3/5 interpolated axes with Can-Open interface for the material, blades and head positioning. The TW3/TW5 motors, in direct drive on the belts or gear that drive the axes movements, guarantee a system with a very accuracy, flexibility, modularity

Plotter laser Machine

Plotter laser Machine COUNTRY: Italy MARKET: Special Machine Nr.5 interpolated axes with Can-Open interface for the material cutting and marking. The TW3/TW5 motors, in direct drive on the belts that drive the laser axes movements, guarantee a system with a very accuracy, flexibility, modularity and high productivity.

Extruder Axis

Extruder Axis COUNTRY: Switzerland MARKET: Plastic IMM Semi-custom PM high-dynamic, low inertia Water Cooled Servomotor direct coupling extruder axis. Low inertia and high dynamic response of the drive results in more accurate control of extruder cycle (pressure control). Very high efficiency (96%) and energy saving cycle.

Multispindle Lathes

Multispindle Lathes COUNTRY: Italy MARKET: Machine Tools (Automotive Market) Machines tools for high productions parts. PMC supplies framless rotor-stator units (oil cooled) with minimum wheelbase, and wide hollow shaft (30Nm @ 20kW with int. diam. 60mm). Very flexible solutions: “Thin ring rotor-stator”

Back to Top